5L HDPE Plastic Bottle Making Machine Extrusion Blow Moulding
Machine - SRB70D-1 , 5 Liter Jerry Can Bottle Blow Molding Machine
, HDPE Jerry Can Making Machine for 5 Liters
1. SRB70D-1 specially double station automatic extrusion bottle
blow molding machine for 5L as maximum.
2. Its output for 5L jerry can is 225 Pcs/hour, for 1 gallon bottle
is 240 Pcs/hour, specially for 1-5L bottles.
3. Adopt pressure / flow double proportion control for hydraulic
system, insure platen moving speed & smoothness.
|Machine Model||Plastic Bottle Making Machine|
|Max Product Volume||5 L|
|Machine Weight||5.5 Tons|
|Machine Size||3.8 x 2.2 x 2.5 m|
|Screw Diameter||70 mm|
|Plasticizing Capacity||90 KG|
|Clamping Force||68 KN|
|Platen Size||320 x 390 mm|
|Platen Opening Stroke||150~500 mm|
|Max Mould Size||360 x 360 mm|
|Head type||Continuous extrusion single head|
|Max die diameter||180 mm|
|Material Cutting Method||Hot Cutting|
|Max Die Diameter||100 mm|
|Total Power||48.5 KW|
|Average Energy Consumption||31.5 KW|
1. Reasonable structure design and solid frame manufacturing to
insure running stability.
2. Good head material runner deisgn and precision metal process for
changing color easily.
3. According to your specified request, our machine can be made
with co-extrusion of 2~4 layers and view stripe line.
4. Colorful touch screen, cantilever operation box, bottle
collective shelves, scraps sliding channel and safety protection.
5. Total machine control system well match with scraps on-line
deflashing, angle adjustable blowing unit, neck rotary cutting,
in-mould labeling, weight testing and leakage testing, product
conveying & packing.
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 31.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
1. Control Unit: WISETECH total machine programmable controller
controller and ture colorful touch panel. English parameter process
setting, state monitoring and products counting are convenient and
intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick,
8. Electrical Components: All of the electrical components are made
in Japan and Taiwan.