1L/2L/3L/4L/5L HDPE Bottle Jerrican Jerrycan Mafufacturing Machine
5 Liter Container Jerry Can Blow Moulding Machine
1. SRB70D-1 specially used for PE & PP bottles, jerrycan,
kettles, containers and jars from 1L to 5L.
2. Machine total control system with convenient operation page
design suitable for remote technical support.
3. Adopt pressure / flow double proportion control for hydraulic
system, insure platen moving speed & smoothness.
4. The output for 150 grams hdpe square bottle is 225 Pcs/hour, the
daily capacity is about 5300 bottles.
|Machine Model||Plastic Bottle Making Machine|
|Max Product Volume||5 L|
|Machine Weight||5.5 Tons|
|Machine Size||3.8 x 2.2 x 2.5 m|
|Screw Diameter||70 mm|
|Plasticizing Capacity||90 KG|
|Clamping Force||68 KN|
|Platen Size||320 x 390 mm|
|Platen Opening Stroke||150~500 mm|
|Max Mould Size||360 x 360 mm|
|Head type||Continuous extrusion single head|
|Max die diameter||180 mm|
|Material Cutting Method||Hot Cutting|
|Max Die Diameter||100 mm|
|Total Power||48.5 KW|
|Average Energy Consumption||31.5 KW|
Click picture to see SRB70D production video for 5L Jerrycan with
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 31.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
1. Control Unit: WISETECH total machine programmable controller
controller and ture colorful touch panel. English parameter process
setting, state monitoring and products counting are convenient and
intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick,
8. Electrical Components: All of the electrical components are made
in Japan and Taiwan.
The working flow of 1L double station triple head plastic bottles
manufacturing machine production flow is basically like this. The
PLC in the electronic control case sends the instruction, the
hydraulic system receives the instruction, the fuel tank and the
motor start to operate, drives the screw to run, and extrudes the
embryo through the die head. The opening and closing mold begins to
be closed, the needle is blown, cooled, and plastic products are